Description
1-conductor male connector; lever; Push-in CAGE CLAMP®; 10 mm²; Pin spacing 7.62 mm; 5-pole; 100% protected against mismating; DIN-35 rail/panel mounting; 10,00 mm²; light gray
831 Series Pin Header with 7.62 mm Pitch
This pin header (item number 831-1205/306-000) enables seamless electrical installation. Rely on proven reliability when designing your device: PCB connectors offer a wide range of application possibilities. This pin header requires stripping lengths of 11 to 13 mm for conductor connection. This product uses Push-in CAGE CLAMP® technology. Push-in CAGE CLAMP® is the maintenance-free universal connector for all conductor types with the added benefit of direct plugging: push-in. Rigid conductors as well as stranded conductors with ferrules can be plugged in directly without tools. Pretreatment of the conductors, such as crimping on ferrules, is not required. The dimensions (width x height x depth) are (41 x 36.2 x 88.4) mm. This pin header is suitable for wire cross-sections from 0.5 mm² to 10 mm², depending on the conductor type. The contact surface is tin. This pin header/connector is actuated by a lever. WAGO's MCS - "Multi Connection System" is a versatile connector system for your consistent system wiring. It enables simplified wiring in cable pre-assembly and on devices thanks to two actuation directions for the CAGE CLAMP® variants.
Connection data
| Clamping units | 5 |
| Total number of potentials | 5 |
| Number of connection types | 1 |
| Number of levels | 1 |
Connection 1
| Connection technology | Push-in CAGE CLAMP® |
| Actuation type | Lever |
| Solid conductor | 0.5 … 10 mm² / 20 … 8 AWG |
| Fine-stranded conductor | 0.5 … 10 mm² / 20 … 8 AWG |
| Fine-stranded conductor; with insulated ferrule | 0.5 … 6 mm² |
| Fine-stranded conductor; with uninsulated ferrule | 0.5 … 6 mm² |
| Strip length | 11 … 13 mm / 0.43 … 0.51 inches |
| Pole number | 5 |
| Conductor entry direction to mating direction | 0° |
Physical data
| Pin spacing | 7.62 mm / 0.3 inches |
| Width | 41 mm / 1.6 inches |
| Height | 36.2 mm |
| Depth | 88.4 mm / 3.480 inches |
Mechanical data
| Variable coding | Yes |
| Mounting type | DIN-35 rail Panel mounting |
| Anti-rotation protection | Yes |
Plug-in connection
| Contact type (pluggable connector) | Male connector/plug |
| Connector (connection type) | for conductor |
| Mismating protection | Yes |
| Plugging without loss of pin spacing | No |
| Locking of plug-in connection | none |
Material data
| Note (material data) | Information on material specifications can be found here |
| Color | light gray |
| Material group | I |
| Insulation material (main housing) | Polyamide (PA66) |
| Flammability class per UL94 | V0 |
| Clamping spring material | Chrome-nickel spring steel (CrNi) |
| Contact material | Electrolytic copper (ECu) |
| Contact plating | Tin |
| Actuator color | orange |
| Weight | 44,7g |
Environmental requirements
| Limit temperature range | -60 … +105 °C |
| Processing temperature | -35 … +60 °C |
Environmental Testing (Environmental Conditions)
| Test specification Railway applications – Rolling stock – Electronic equipment | DIN EN 50155 (VDE 0115-200):2022-06 |
| Test procedure Railway applications – Rolling stock equipment – Shock and vibration tests | DIN EN 61373 (VDE 0115-0106):2011-04 |
| Spectrum/Installation location | Service life test, Category 1, Class A/B |
| Function test with noise-like vibration | Test passed according to Section 8 of the standard |
| Frequency | f1 = 5 Hz to f2 = 150 Hz |
| Acceleration | 0.101g (highest test level used for all axes) |
| Test duration per axis | 10 min. |
| Test directions | X, Y and Z axes |
| Monitoring for contact faults/interruptions | Passed |
| Voltage drop measurement before and after each axis | Passed |
| Simulated service life test through increased levels of noise-like vibration | Test passed according to Section 9 of the standard |
| Frequency | f1 = 5 Hz to f2 = 150 Hz |
| Acceleration | 0.572g (highest test level used for all axes) |
| Test duration per axis | 5 h |
| Test directions | X, Y and Z axes |
| Extended test scope: Monitoring for contact faults/interruptions | Passed |
| Extended test scope: Voltage drop measurement before and after each axis | Passed |
| Shock test | Test passed according to Section 10 of the standard |
| Shock form | Half sine |
| Acceleration | 5g (highest test level used for all axes) |
| Shock duration | 30 ms |
| Number of shocks per axis | 3 pos. und 3 neg. |
| Test directions | X, Y and Z axes |
| Extended test scope: Monitoring for contact faults/interruptions | Passed |
| Extended test scope: Voltage drop measurement before and after each axis | Passed |
| Vibration and shock stress for rolling stock equipment | Passed |
Commercial data
| PU (SPU) | 6 pcs |
| Packaging type | Box |
| Country of origin | DE |
| GTIN | 4066966115628 |
| Customs tariff number | 85366930000 |
Product classification
| UNSPSC | 39121409 |
| ETIM 9.0 | EC001284 |
| ETIM 8.0 | EC001284 |
| ECCN | NO US CLASSIFICATION |
Environmental Product Compliance
| RoHS Compliance Status | Compliant,No Exemption |
Hot Tags: 831-1205/306-000, China 831-1205/306-000 manufacturers, suppliers, factory
Send Inquiry
You Might Also Like
