OSRAM DURIS® E 2835 GW JTLMS1.EM-GVH3-XX57-1-60-R33 A 3000K Warm White 0.2W-Class 2835 SMD LED

OSRAM DURIS® E 2835 GW JTLMS1.EM-GVH3-XX57-1-60-R33 A 3000K Warm White 0.2W-Class 2835 SMD LED

- Package: 3.5 mm × 2.8 mm × 0.7 mm (2835 SMD)
- CCT: 3000 K warm white, CRI (min.) 80
- Test Condition: 60 mA / 2.95 V (typ.)
- Luminous Flux: 25.5 – 33.0 lm @ 60 mA, 25°C
- Viewing Angle: 120° wide beam for uniform light distribution

Description

Product Introduction

 

 

The GW JTLMS1.EM-GVH3-XX57-1-60-R33 belongs to the ams OSRAM DURIS® E 2835 platform-a warm white SMD LED positioned for low-to-mid power general lighting. Its core value is not chasing maximum brightness, but delivering stable, predictable light output and color consistency at the 0.2 W class. The 3000 K CCT with a CRI minimum of 80 makes it suitable for indoor fixtures that need a warm feel while maintaining basic color rendering expectations. The 120° viewing angle allows a single LED to cover a relatively wide emitting surface, reducing the burden on secondary optics-an advantage for panel lights, linear luminaires, and downlights. The 60 mA test current and approximately 2.95 V forward voltage make it easy to pair with conventional constant-current drivers without special configurations. For LED module and fixture manufacturers, the practical appeal is a simple design interface, mature supply channels, and controllable batch consistency: it does not add engineering complexity, but rather delegates the baseline light-generation step to a package platform that has been validated in the field over time.

Key Product Features

 

 

  • Standard 2835 footprint for line compatibility: The 3.5 mm × 2.8 mm land pattern matches mainstream 2835 pad layouts, so switching to this part typically requires no PCB library changes.
  • 3000 K warm white with CRI 80 (min.) : Suited to indoor settings-residential, hospitality, retail-that call for a warm feel and acceptable color rendering for commercial use.
  • Defined flux window at 60 mA test current: The 25.5 – 33.0 lm binning range lets module designers budget a realistic brightness tolerance.
  • 120° wide viewing angle: Large per-LED light coverage reduces reliance on diffusers and secondary optics, supporting uniformity in slim fixture designs.
  • 25°C/W thermal resistance keeps thermal management simple: At the 0.2 W class, standard FR-4 boards are generally sufficient-no metal-core PCB or elaborate thermal design required.

 

Item Value
Manufacturer ams OSRAM
Series DURIS® E 2835
Package 3.5 mm × 2.8 mm
CCT 3000 K
Flux @ 25°C, 60 mA 25.5 – 33.0 lm
Vf (Typ.) 2.95 V
Test Current 60 mA
Max Current 150 mA
Viewing Angle 120°
Thermal Resistance 25°C/W

Application Scenarios

 

 

The practical landing zone for this LED is indoor general lighting. The DURIS E 2835 series page on Mouser lists typical applications including indoor general lighting, linear lights, retrofits and fixtures, and task lights. Combined with the 3000 K warm white and 120° viewing angle, it fits scenarios such as:

 

  • LED panel lights and linear luminaires: The wide beam supports even luminance behind a diffuser, reducing visible LED "dots."
  • Downlight and spotlight modules: At 60 mA, the flux level is appropriate for warm-white fill light in small-to-medium aperture downlights.
  • Retrofit lamps and fixture upgrades: The 2835 package has a mature supply chain in bulbs and GU10 modules, lowering material risk during replacement or ramp-up.
  • Hospitality and commercial accent lighting: 3000 K warm white works well for corridors, guest rooms, and restaurant perimeter lighting where a soft, non-glare feel matters.

Why Choose Gainer LED?

 

 

  • 14 years in LED component distribution: Long-standing focus on the LED space and familiarity with the product lines and part-number systems of OSRAM, Cree, Lumileds, and others-useful for quickly confirming part status and alternative directions.
  • One-stop sourcing: LEDs, drivers, and optics can be consolidated through a single channel, reducing the overhead of coordinating multiple suppliers and stitching together logistics.
  • Broad brand portfolio: Beyond OSRAM, multiple mainstream LED brands are covered, which suits manufacturing customers who need cross-brand price comparison or mixed-BOM options.
  • Broad part coverage with small-batch friendliness: Commonly used part numbers are held in stock, supporting the transition from sample validation to volume production-practical for module and fixture makers during pilot runs.
  • Original factory reel shipment with traceability: Delivered in original packaging and reel specifications, simplifying incoming inspection and line-side material changeover.
FAQ

Q: Can this LED be used in outdoor fixtures?

A: Based on the package and power class, it is better suited to indoor or well-protected semi-outdoor environments. For outdoor use, the fixture must provide effective moisture and dust protection, and the operating temperature must remain within the datasheet limits. Bare-board designs directly exposed to rain, condensation, or high humidity are not recommended for this part.

Q: Can I use this LED if my driver current is not 60 mA?

A: Yes, but thermal and optical output should be re-evaluated. The device has a maximum current of 150 mA, but flux, forward voltage, and junction temperature all shift with current. If your driver runs at 100 mA or 120 mA, first confirm the thermal design can support it, then recalculate whether actual brightness still meets the fixture target. 60 mA is the datasheet test point, not the only usable current.

Q: As a trader, how is sourcing from Gainer LED different from ordering directly from the manufacturer?

A: For small-to-mid volume or mixed-part-number orders, distribution channels typically offer more flexible lead times and lower MOQ thresholds. Gainer LED supports consolidated purchasing across multiple brands and part numbers, which suits traders building stock or combining shipments. Direct factory supply is better suited to high-volume, long-term agreements on a single part number. The two are complementary, depending on your order structure and inventory strategy.

Q: How do I choose between this 3000K warm white and 2700K for indoor lighting?

A: 2700K is closer to the warm amber feel of traditional incandescent; 3000K is slightly more neutral-it retains warmth without making a space look overly yellow. For residential bedrooms or hotel guest rooms, 2700K may be a closer match; for retail, restaurant front-of-house, or office accent lighting, 3000K generally balances "warmth" and "clarity" more comfortably. The same DURIS E 2835 series also offers 2700K part numbers for side-by-side evaluation.

Q: How can I control color variation between production lots in volume manufacturing?

A: Specify the same or adjacent flux/chromaticity bins in the purchase order, and retain original reel labels for traceability. During the pilot run, complete optical validation with a single lot; in mass production, feed materials bin-by-bin rather than mixing different bins on the same panel or linear strip, which can create visible color shifts. If color consistency is critical, request bin information from the supplier before ordering or ask for a mixed-bin plan.

 

Hot Tags: OSRAM DURIS® E 2835 GW JTLMS1.EM-GVH3-XX57-1-60-R33 A 3000K Warm White 0.2W-Class 2835 SMD LED, China OSRAM DURIS® E 2835 GW JTLMS1.EM-GVH3-XX57-1-60-R33 A 3000K Warm White 0.2W-Class 2835 SMD LED manufacturers, suppliers, factory, GW QSLPS1 EM LXL1 XX56 1, LE RTDUW S2WN KBLA 1 MANA P AXAZ P MBNB CQ, 8 digit led display drivers, SFH 4043, SFH 4543 BWCW, GW JTLMS3 CM G8GW XX51 1 60 R33

You Might Also Like

Shopping Bags