ams OSRAM DURIS E 2835 Series GW JTLMS3.CM-G8GW-XX55-1-60 4000K CRI 90 Strip LED

Product Introduction

The GW JTLMS3.CM-G8GW-XX55-1-60 is a 4000 K neutral white emitter from the ams OSRAM DURIS E 2835 family, in the 0.2 W SOFTLINEAR version built for flexible LED strips. It delivers 22.5 to 28.5 lm at the 60 mA test current from a pre-molded package measuring 3.5 × 2.8 × 0.7 mm.

Colour quality is the main reason to choose this part over a general-purpose 2835. CRI is 90 minimum and 92 typical, with R9 held at 50 minimum, so reds and skin tones keep their colour instead of flattening out. The 120° beam from a diffused silicone resin spreads light evenly along a strip, which often removes the need for extra diffusion.

Forward voltage is 2.90 V typical inside a narrow 2.80 to 3.00 V window - only two voltage groups exist across the whole family, which helps current sharing on a long strip. Thermal resistance is 42 K/W and the junction limit is 105 °C. ams OSRAM states that LM-80 lumen maintenance results are available.

Key Product Features

1. CRI 90 with R9 at 50 Minimum：Reds, skin tones, and warm wood finishes keep their colour under this emitter. That matters on strips sold into retail shelving, hospitality, and office lighting, where a general-purpose 2835 visibly flattens the same materials.
2. Narrow 2.80 V to 3.00 V Forward Voltage Window：The whole family uses just two voltage groups. On a long strip carrying many emitters, that tight spread means current shares more evenly between LEDs, so brightness stays level along the run.
3. 0.2 W SOFTLINEAR Construction：The pre-molded body weighs 18.0 mg and is built for flexible strip substrates. Low mass and a 120° diffused beam suit tape light, cove runs, and any fixture where the board bends.
4. LM-80 Lumen Maintenance Data Available：ams OSRAM states that IESNA LM-80 test results exist for this part. Luminaire makers need that report for warranty terms, TM-21 projections, and energy-efficiency programme registration.
5. 10 000 Pieces per Reel at MSL 3：The 330 mm reel holds 10 000 pieces on 8 mm tape, so a strip line runs longer between reel changes. MSL 3 dry-pack means a 168-hour floor time once the bag is opened.

Application Fields

The GW JTLMS3.CM-G8GW-XX55-1-60 is a mid-power emitter designed around flexible strip products, with a colour quality that suits indoor commercial interiors. Typical specifications include:
 

- Flexible LED strips and tape light – the application ams OSRAM built the SOFTLINEAR version for, in both IP-rated and open-board formats.
- Linear luminaires and battens – continuous rows where even spacing and a wide beam avoid visible hot spots.
- LED panel lights and troffers – 600 × 600 mm and 300 × 1200 mm backlit and edge-lit panels.
- Retail shelf and display lighting – shelves and cases where CRI 90 and R9 ≥ 50 keep merchandise colour accurate.
- Under-cabinet and cove lighting – shallow, concealed runs that rely on a diffused 120° beam.
- Office and hospitality interiors – general illumination specified to a colour-quality standard rather than to price alone.
- Signage and light boxes – uniform backlighting for channel letters and edge-lit panels.
- Downlight and spotlight modules – multi-emitter heads where a low-profile source is required.
- Light guide and edge-lit assemblies – backlights where a wide beam couples efficiently into the guide.
- Custom OEM strip and module assemblies – branded products built by LED module makers on the standard 2835 footprint.

Why Choose Gainer LED?

Gainer LED supplies branded optoelectronic components to B2B buyers across the LED supply chain - module and strip makers, luminaire manufacturers, brand representatives, wholesalers, and component distributors. What follows is what that means in practice.

- Colour consistency held across repeat orders：We hold your specified flux group, colour bin, and voltage group on every repeat order instead of shipping whatever is in stock, so strip run number 40 matches strip run number 1.
- Traceability that survives eighteen months：Every reel keeps its factory group name label and date code. When a customer queries a tint difference a year and a half later, the shipment can be traced back to a specific reel.
- Exact-code quoting, with no silent substitutions：We quote and ship against the ordering code on your drawing - Q65113A6700 or whatever your customer specified. If a requested bin is not available, we say so in writing instead of substituting and hoping it passes.
- Mixed consolidation across a single platform：Because this family covers 1800 K to 6500 K on one 2835 footprint at one test current, mixed colour temperatures, mixed flux groups, and mixed quantities can be consolidated into one shipment. Buyers who serve several end customers stock one platform instead of six.
- Packaging integrity, samples, and straight answers：Reels ship factory sealed inside intact dry-pack with the desiccant and humidity indicator card present, and the date code and reel quantity are confirmed on the packing list. Samples and split quantities are available before you commit to a full reel, and if a part is not right for your application, we will tell you.