
ams OSRAM TOPLED® E1608 KR DELPS1.22-RGTG-26-C6J4-5 0603 Red LED Chips
- Top-emitting 0603 — 1.6 by 0.8 mm, standing 0.6 mm on a white reflector behind a colourless resin window.
- Red at 617 nm typical — five dominant-wavelength groups spanning 612 to 630 nm, 19 nm of spectral width, and a 0.14 nm shift for every kelvin.
- Twenty milliamps to thirty — 1.95 to 2.50 V across three voltage groups, with a hundred milliamps available for ten microseconds on a half-per-cent duty.
- Seven intensity groups from 450 to 1300 mcd — UG at the floor and AX at the ceiling, all reachable through a single ordering row.
- Automotive-qualified, corrosion class 2B — 21 days at 25 °C, 75 % RH and 10 ppm hydrogen sulphide behind the class.
Description
Product Introduction
The reference carries two halves. KR DELPS1.22 names the device; RGTG-26-C6J4-5 names the bins inside it, and the second half is where a purchase order lands. The current datasheet, version 1.8 dated 2025-03-10, prints one ordering row: KR DELPS1.22-UGAX-26-H3Q4-20, recorded as Q65115A0425, at 450 to 1300 mcd on a 20 mA drive. Set those letters against the three ladders and the row covers everything - UG through AX is all seven brightness groups, 26 all five wavelength groups, H3Q4 all three voltage groups.
The suffix here does not read that way. RG and TG are not groups in the brightness ladder, C6 and J4 are not in the voltage ladder, and the sheet bins nothing except at the 20 mA printed above its only column. Version 1.8 replaced three things at once: ordering rows, the brightness ladder and the label example. That is what a replaced alphabet looks like from outside.
Key Product Features
1. One Row Covers Seven Groups
UGAX runs from UG at 450 mcd to AX at 1300 mcd. A buyer who orders the documented code accepts any of the seven, so the intensity is fixed on the reel label, not on the order line.
2. Four Letters in This Suffix Sit Outside Every Ladder
The brightness ladder holds UG, UH, UI, VG, VH, VI and AX; the voltage ladder holds H3, L4 and Q4. RG, TG, C6 and J4 appear in none of them. The sheet also publishes one test current only: 20 mA.
3. The Label Is Where a Bin Gets Named
The worked example AX-2-H3 runs brightness, then wavelength, then voltage. Three fields against three ladders, and the code above them can span all three at once.
4. Automotive Qualification at 1.6 by 0.8 mm
AEC-Q102 is claimed in the feature list, and the package holds corrosion class 2B against a 21-day hydrogen-sulphide test at 10 ppm.
5. The Board Adds Roughly Fifteen Kelvin
The test point is 43 mW of dissipation, which is 2.15 V at 20 mA. Six kelvin of the climb happen between junction and solder point at 150 K/W. About fifteen more arrive on the way out to ambient, where the sheet quotes 510 K/W over a 16 mm² pad. Most of those fifteen belong to the board.
| Parameter | Value |
| Ordering Code | Q65115A0425 |
| Documented Type | KR DELPS1.22-UGAX-26-H3Q4-20 |
| Colour | Red, 617 nm dominant typical |
| Luminous Intensity | 450 to 1300 mcd at 20 mA |
| Forward Voltage | 1.95 / 2.15 / 2.50 V, three groups |
| Drive Current | 20 mA test, 30 mA maximum |
| Viewing Angle | 120° at half intensity |
| Thermal Path | 120 typical, 150 maximum, junction to solder |
| Body | 1.6 × 0.8 × 0.6 mm, 2.0 mg |
| Reel | 180 mm hub, 8 mm tape, 9 000 pieces |
Application Fields
- Ambient and accent lighting - light guides, edge-lit panels and fascia strips where a 1.6 mm emitter disappears into the assembly.
- Appliance and tool indicators - status lamps on white goods and hand tools that need a sealed package and a 30 mA ceiling rather than brightness.
- Automotive aftermarket - retrofit and accessory lighting, where the AEC-Q102 claim matters but the vehicle-level qualification is the buyer's own.
- Functional illumination - switches, backlit symbols and control panels that run continuously at a few milliamps and need a stable red.
Why Choose Gainer LED?
- Grouping - several series can be combined on one order, so a lighting bill of materials leaves as a single consignment.
- Stockholding - inventory is carried against short-notice builds rather than ordered against a catalogue lead time.
- Labelling - cartons and reels are marked to the format the receiving country expects, so goods-in does not have to re-label.
- Substitution - a reference that cannot be matched is offered with the nearest live alternative and the difference stated, not silently swapped.
- Cross-reference - an old number is checked against the current catalogue and the answer confirmed in writing before anything is booked.
FAQ
Q: Our list says RGTG-26-C6J4-5. Can you quote exactly that?
A: Not from the datasheet, because its brightness and voltage ladders do not contain RG, TG, C6 or J4, and it bins only at a 20 mA drive. Send the reference and we will confirm which binning document covers it. The row the current sheet does print is UGAX-26-H3Q4-20, Q65115A0425, at 450 to 1300 mcd.
Q: The reel label reads AX-2-H3. Is that the part we ordered?
A: Yes, if you ordered the documented code. The label names the three bins inside it: AX is the top brightness group at 1120 to 1300 mcd, 2 is the 612 to 616 nm wavelength group, and H3 is the 1.95 to 2.10 V group. A different label is a different bin, not a wrong part.
Q: Does 30 mA work as a continuous drive?
A: 30 mA is the ceiling, and only at a 25 °C solder point. The derating chart pulls that down as the board warms, so a sealed housing may sit well below it. The 100 mA allowance is a ten-microsecond event at half a per cent, and it says nothing about continuous running.
Q: Does the AEC-Q102 claim cover our interior module?
A: It covers the component, not the module. The datasheet declines responsibility at module and system level, so an interior programme still needs its own validation. Use the qualification as an input to that work rather than as a substitute for it.
Q: Our pad is smaller than 16 mm². Does the 510 K/W still apply?
A: No. That figure is quoted on a 16 mm² pad of FR4, so a smaller pad raises it and a larger one lowers it. Design against the 150 K/W junction-to-solder figure and model your own board from there, then check the result against the derating curve.
Hot Tags: ams OSRAM TOPLED® E1608 KR DELPS1.22-RGTG-26-C6J4-5 0603 Red LED Chips, China ams OSRAM TOPLED® E1608 KR DELPS1.22-RGTG-26-C6J4-5 0603 Red LED Chips manufacturers, suppliers, factory, CT DELSS1 12 AABB 36 N626 20 R18, led driver, BPY 62 3 4, SFH 203 FA, GW JTLPS1 CM JMKM XX56 1, LY E67F BADA 46 3B5A 50 R18
Send Inquiry
You Might Also Like
-

GW CS8PM1.PM-LRLT-A232-1-350 ams OSRAM 5700 K OSLON ...
-

ams OSRAM OSLON SSL 80 GW CS8PM1.EM-LSLU-XX55-1-350 ...
-

ams OSRAM Multi CHIPLED LRTB R48G RGB Pixel LED LRTB...
-

ams OSRAM SFH 4716AS High-Intensity Infrared IR LED ...
-

ams OSRAM SFH 7072 BIOFY® Sensor Integrated RGB-IR E...
-

ams OSRAM OSLON® SSL 80 High Power Red LED GR CS8PM1...

