Description
2-conductor through terminal block; with push-button; 2.5 mm²; with test port; suitable for Ex e II applications; side and center marking; for DIN-rail 35 x 15 and 35 x 7.5; Push-in CAGE CLAMP®; 2,50 mm²; green
This feed-through terminal block with the article number 2202-1201/000-001 focuses on a simple and secure connection. This feed-through terminal block requires a stripping length of between 10 and 12 mm for the conductor connection. Regardless of whether in industrial applications or in building applications: With the feed-through terminal blocks, electrical conductors can be connected quickly and securely. Depending on the design, they are suitable for classic through wiring or potential distribution. This product is equipped with Push-in CAGE CLAMP® technology. Push-in CAGE CLAMP® is the maintenance-free universal connection for all conductor types with the added benefit of direct plugging in: Push-in. Rigid conductors as well as fine-stranded conductors with ferrules can be plugged in directly without tools. Pre-treatment of the conductors, e.g. by crimping on ferrules, is not necessary. The dimensions are width x height x depth (5.2 x 48.5 x 39.5) mm. Depending on the conductor type, the feed-through terminal block is suitable for conductor cross-sections from 0.25 mm² to 4 mm². This feed-through terminal block is operated using a push-button. TOPJOB® S terminal blocks ensure a secure electrical connection in a wide variety of industrial applications and in modern building installations. With just one terminal block system, you can work anywhere in the world and in all applications. This product is suitable for certain Ex applications (see product data sheet).
Ratings per IEC/EN
| Ratings per | IEC/EN 60947-7-1 |
| Nominal voltage (III/3) | 800V |
| Rated impulse withstand voltage (III / 3) | 8kV |
| Rated current | 24A |
| Legend (ratings) | (III / 3) ≙ Overvoltage category III / Pollution degree 3 |
Ratings per UL
| Approvals per | UL 1059 |
| Rated voltage UL (Use Group B) | 600V |
| Rated current UL (Use Group B) | 20A |
| Rated voltage UL (Use Group C) | 600V |
| Rated current UL (Use Group C) | 20A |
Ratings per CSA
| Approvals per | CSA 22.2 No 158 |
| Rated voltage CSA (Use Group B) | 600V |
| Rated current CSA (Use Group B) | 20A |
| Rated voltage CSA (Use Group C) | 600V |
| Rated current CSA (Use Group C) | 20A |
Ex information
| Reference hazardous areas | See "Downloads – Documentation – Additional Information: Technical Section; Technical Explications" |
| Ratings per | ATEX: PTB 18 ATEX 1005 U / IECEx: PTB 18.0012U (Ex eb IIC Gb) |
| Rated voltage EN (Ex e II) | 550V |
| Rated current (Ex e II) | 22A |
| Rated current (Ex e II) with jumper | 20A |
Power Loss
| Power loss, per pole (potential) | 0,766W |
| Rated current IN for specified power loss | 24A |
| Resistance value for specified, current-dependent power loss | 0,001Ω |
Connection data
| Clamping units | 2 |
| Total number of potentials | 1 |
| Number of levels | 1 |
| Number of jumper slots | 2 |
Connection 1
| Connection technology | Push-in CAGE CLAMP® |
| Actuation type | Push-button |
| Connectable conductor materials | Copper |
| Nominal cross-section | 2.5 mm² |
| Solid conductor | 0.25 … 4 mm² / 22 … 12 AWG |
| Solid conductor; push-in termination | 0.75 … 4 mm² / 18 … 12 AWG |
| Fine-stranded conductor | 0.25 … 4 mm² / 22 … 12 AWG |
| Fine-stranded conductor; with insulated ferrule | 0.25 … 2.5 mm² / 22 … 14 AWG |
| Fine-stranded conductor; with ferrule; push-in termination | 1 … 2.5 mm² / 18 … 14 AWG |
| Note (conductor cross-section) | Depending on the conductor characteristic, a conductor with a smaller cross-section can also be inserted via push-in termination. |
| Strip length | 10 … 12 mm / 0.39 … 0.47 inches |
| Wiring direction | Front-entry wiring |
Physical data
| Width | 5.2 mm / 0.205 inches |
| Height | 48.5 mm / 1.909 inches |
| Depth from upper-edge of DIN-rail | 32.9 mm / 1.295 inches |
| Depth | 39.5 mm / 1.555 inches |
Mechanical data
| Mounting type | DIN-35 rail |
| Marking level | Center/side marking |
Material data
| Note (material data) | Information on material specifications can be found here |
| Color | green |
| Material group | I |
| Insulation material (main housing) | Polyamide (PA66) |
| Flammability class per UL94 | V0 |
| Fire load | 0,129MJ |
| Actuator color | orange |
| Weight | 5,3g |
Environmental requirements
| Processing temperature | -35 … +85 °C |
| Continuous operating temperature | -60 … +105 °C |
Commercial data
| PU (SPU) | 100 pcs |
| Packaging type | Box |
| Country of origin | DE |
| GTIN | 4066966735765 |
| Customs tariff number | 85369010000 |
Product classification
| ETIM 9.0 | EC000897 |
| ECCN | NO US CLASSIFICATION |
Environmental Product Compliance
| RoHS Compliance Status | Compliant,No Exemption |
Hot Tags: 2202-1201/000-001, China 2202-1201/000-001 manufacturers, suppliers, factory
Send Inquiry
You Might Also Like
