
OSRAM DURIS® S 5 GW PSLR31.EM-LQLS-XX53-1 5000K Cool White 6V-Class 3030 LED
Package & Size: 3.0 mm × 3.0 mm × 0.6 mm SMD, 120° Lambertian, standard 3030 footprint
CCT & CRI: 5000 K cool white, CRI min. 80 (typ. 82), R90 min.
Test Condition: 150 mA / 6.2 V (typ.), flux 136 lm (121–150 lm bin), efficacy approx. 146 lm/W
Drive & Thermal: 200 mA max forward current; −40°C to +100°C operating range
Description
Product Introduction
The GW PSLR31.EM-LQLS-XX53-1 is a 5000 K cool white LED on ams OSRAM's DURIS® S 5 platform-3030 package, 6.2 V forward voltage, delivering 136 lm typical flux and roughly 146 lm/W efficacy at the 150 mA test current. DURIS S 5 is officially positioned as a compact mid-power device that covers multiple flux levels within a single package and solder pad, aimed at indoor general lighting, linear lights, professional downlights, and retrofits. The 3030 footprint and 120° Lambertian output are highly standardized in industrial LEDs, so modules already on a 3030 platform typically face minor package-level changes during selection or sourcing switches.
Key Product Features
- 5000 K cool white with CRI 80 for crisp neutral light: The CCT sits on the cooler side with higher visual clarity-suited to retail, office, and industrial indoor settings that need a "clean and sharp" feel, while CRI 80 meets routine commercial color-rendering expectations.
- 6.2 V-class forward voltage eases current-side pressure: At the 150 mA test point, power is roughly 0.93 W. Compared with a 3V-class device at the same power, drive current is lower, placing less stress on constant-current drivers and less loss on long-strip harnesses.
- High compatibility from 3030 package + 120° Lambertian output: The 3.0 mm × 3.0 mm footprint is widely used in panel lights, linear luminaires, and downlights; the 0.6 mm height suits slim constructions, and diffuser designs have more tolerance.
- 136 lm / 146 lm/W efficacy level: A usable, balanced point within 3030 cool-white mid-power options-a single emitter delivers hundred-lumen-class output, reducing LED count and wiring density.
| Item | Value |
| Manufacturer | ams OSRAM |
| Series | DURIS® S 5 |
| Package | 3030(3.0 mm × 3.0 mm × 0.6 mm) |
| CCT | 5000 K |
| CRI | 80 |
| Flux @ 150 mA | 136 lm |
| Vf (Typ.) | 6.2 V |
| Test Current | 150 mA |
| Max Current | 200 mA |
| Beam & Top | 120°;−40°C - +100°C |
Application Scenarios
DURIS S 5's official application list includes indoor general lighting, industrial lighting, linear lights, professional downlights, and retrofits. Combined with 5000 K cool white, 6V-class drive, and the 3030 package, the XX53 bin maps to several practical manufacturing needs:
- Linear lights and office lighting modules: 5000 K cool white provides crisp, neutral-leaning white in office and commercial spaces; the 6V-class drive is comparatively less sensitive to harness voltage drop on long strips, and the 3030 package supports even, dense arrays.
- Professional downlights and directional luminaires: The 136 lm per-LED flux makes brightness configuration manageable in small-to-mid aperture downlights, and the 120° output diffuses into a soft downward distribution-suited to retail and hospitality base lighting.
- Industrial and warehouse auxiliary lighting: Cool white's visual clarity aids identification in industrial settings, and the mature 3030 footprint simplifies replacement and maintenance-though note that CRI 80 positioning is not aimed at inspection scenarios requiring high color fidelity.
- Maintenance and substitution validation for existing 3030-platform products: For fixtures designed around DURIS S 5, this part serves a residual-supply role within the last-delivery window until the OSCONIQ E 3030 replacement completes optical and thermal validation.
Why Choose Gainer LED?
- 14 years in LED component distribution: Long-term tracking of OSRAM discontinuation cadence and replacement paths helps customers align the last-order window with replacement validation when a family like DURIS S 5 winds down-rather than starting the search after stock runs dry.
- One-stop sourcing: LEDs, driver ICs, optics, and passives can be consolidated through one channel. Migrating from DURIS S 5 to OSCONIQ E 3030 involves driver-parameter review and optical-matching confirmation, and unified purchasing cuts the time spent coordinating across separate suppliers.
- Broad brand portfolio: Multiple mainstream LED brands are covered, supporting cross-brand comparison of 5000 K cool white, CRI, and package size during an OSRAM family transition-without limiting replacement options to a single source.
- Broad part coverage with small-batch and sample friendliness: Commonly used part numbers and some wind-down-stage items still have stock coverage, supporting the transition from a few replacement samples to maintenance quantities-practical for legacy replenishment and pilot confirmation.
- Factory-pack shipment with traceable bin information: Delivered in original reel or cut-tape specifications with labels and bin data intact, simplifying incoming inspection and line-side bin management-reducing brightness and CCT variation risk from mixed lots during a family transition.
FAQ
Q: This part is discontinued-can I directly drop in the official replacement GW QSLPS1.EM-LYL2-XX53-1?
A: The package is also 3030, the viewing angle also 120°, and Vf is close (6.19 V vs. 6.2 V), so the drive interface carries over well. But the flux window moves from 121–150 lm to 145–165 lm, meaning actual brightness at the same drive current may increase. If your fixture thermal design was built around the upper end of the original flux range, re-confirm junction temperature and target-surface illuminance are still within tolerance. The stated reason is "New devices available as replacements"-this is a migration with a defined path, not a simple one-for-one swap.
Q: Is the 6.2V Vf compatible with my existing 3V-class driver design?
A: Sharing a constant-current channel directly is not possible. A 6.2 V-class device has a forward drop far higher than a 3V-class LED, and the driver's output voltage range must cover above 6 V-otherwise regulation may fail or protection may trip. If the existing design targets 3V-class parts, verify the driver's maximum output voltage and current-regulation accuracy before substituting. The 6V-class advantage is lower current at the same power, but it depends on the driver having sufficient voltage headroom.
Q: As a distributor, is this discontinued part still worth holding?
A: It depends on whether downstream fixture or module makers still buy DURIS S 5 for maintenance. 5000 K cool white is a routine requirement in the 3030 mid-power segment, but a family-wide wind-down means new design-ins will gradually stop and demand will converge toward "legacy maintenance." Hold only against confirmed customer usage rather than speculating, and align inventory turnover with the customer's migration to OSCONIQ-avoiding tail stock after the switch is complete.
Q: How does 5000K compare with 4000K or 5700K for indoor lighting selection?
A: 5000 K sits between 4000 K's neutral white and 5700 K's cooler lean-visually "crisper" than 4000 K and less blue than 5700 K. Office, retail, and industrial settings often favor the 4000–5000 K range for clarity; if a warmer atmosphere is needed, 4000 K or 3500 K fits better; extremely cool white at high illuminance would bring 5700 K or 6500 K into consideration. Compare physical samples at the target illuminance-CCT perception shifts with brightness and surroundings.
Q: What is the standard reel and MOQ? Can I get a small sample quantity for substitution validation?
A: The family ships in Tape & Reel (TR), and distribution channels such as DigiKey commonly offer cut-tape or Digi-Reel break quantities. Substitution validation usually needs only a few dozen pieces for brightness, CCT, and thermal comparison, so ask your supplier directly about break-quantity policy and any minimum order. With a discontinued part, the priority is aligning the validation window with the last-delivery date-completing replacement confirmation within available stock matters more than a single large purchase.
Hot Tags: OSRAM DURIS® S 5 GW PSLR31.EM-LQLS-XX53-1 5000K Cool White 6V-Class 3030 LED, China OSRAM DURIS® S 5 GW PSLR31.EM-LQLS-XX53-1 5000K Cool White 6V-Class 3030 LED manufacturers, suppliers, factory, SFH 4716AS, SFH 320 Z, led light heat sink, SFH 203, Osram SFH 4725AS, SFH 309 FA 4
Send Inquiry
You Might Also Like
-

GW CSSRM2.CM-M5M7-XX55-1-700-R18 ams OSRAM OSLON® Sq...
-

GR CSHPM1.23-KQKS-1-0-350-R18 ams OSRAM OSLON® SSL 150
-

ams OSRAM DURIS® E 2835 2700K GW JTLMS1.EM-G9H2-XX58...
-

ams OSRAM DURIS E 2835 3500 K Neutral White LED GW J...
-

ams OSRAM GW JTLPS1.EM-KKLN-XX52-1-150-C Ultra-High ...
-

ams OSRAM GW JTLPS1.EM-KKLN-XX51-1-150-C High-Perfor...

