OSRAM DURIS® E 2835 GW JTLMS1.CM-G7H2-XX56-1-60-R33 3500K CRI 90 Warm White 2835

OSRAM DURIS® E 2835 GW JTLMS1.CM-G7H2-XX56-1-60-R33 3500K CRI 90 Warm White 2835

Package & Size: 3.5 mm × 2.8 mm × 0.7 mm (1411/3528 SMD), 120° Lambertian
CCT & CRI: 3500 K warm white, CRI 90 (min.), suited to indoor lighting with color-rendering requirements
Test Condition: 60 mA / 2.96 V (typ.), flux 26 lm (21–32 lm bin), efficacy approx. 146 lm/W
Thermal & Drive: 25°C/W package thermal resistance; 150 mA max current; −40°C to +100°C operating range

Description

Product Introduction

 

 

The GW JTLMS1.CM-G7H2-XX56-1-60-R33 is a 3500 K warm white LED from ams OSRAM's DURIS® E 2835 white family, with a CRI minimum of 90-a color-rendering-leaning option within a package size known primarily for cost-effectiveness. The 2835 (3.5 mm × 2.8 mm) is among the most mature industrial LED footprints, with pad layouts carried across panel lights, linear luminaires, downlights, and retrofit designs, so package-level changes during sourcing switches are typically minor. A 60 mA test current and 2.96 V typical forward voltage put it in the roughly 0.18 W class, with a low matching threshold for conventional constant-current drivers-no dedicated topology adjustment required. The 120° Lambertian output and 0.7 mm height produce even luminance behind a diffuser, suited to fixtures that need slim profiles and uniform mixing.

Key Product Features

 

 

  • 3500 K + CRI 90 warm-white high-CRI pairing: The CCT sits in the neutral-to-warm range, and a CRI minimum of 90 brings skin tones, wood finishes, and fabrics closer to natural light than CRI 80 devices-useful in residential, hospitality, and commercial spaces where the light simply needs to "look right."
  • Mature 2835 footprint at 0.7 mm low height: The 3.5 mm × 2.8 mm land pattern is highly standardized in industrial LEDs, so modules already on a 2835 platform typically need no PCB library or stencil changes when switching bins within the family.
  • Low-threshold 60 mA / 2.96 V drive interface: At roughly 0.18 W and a 150 mA maximum, it matches readily to conventional constant-current drivers without redesigning driver parameters for a single LED.
  • 25°C/W package thermal resistance with −40°C to +100°C operation: At 60 mA and below in routine use, FR-4 boards are generally sufficient-no metal-core PCB or elaborate thermal design required for this device alone.
  • 120° Lambertian output at roughly 146 lm/W: Within the 2835 warm-white high-CRI segment, the balance of efficacy and beam distribution is even, giving diffuser designs more tolerance and supporting fixtures that need brightness, color rendering, and slim profiles together.

 

Item Value
Manufacturer ams OSRAM
Series DURIS® E 2835
Package 3528,3.5 × 2.8 × 0.7 mm
CCT 3500 K
CRI 90
Flux @ 60 mA 26 lm
Vf (Typ.) 2.96 V
Test Current 60 mA
Max Current 150 mA
Beam & Thermal 120°;25°C/W

Application Scenarios

 

 

ams OSRAM's official DURIS E 2835 white-family materials emphasize "homogeneous illumination" and "system-level performance." Combined with the 3500 K CRI 90 positioning, this device maps to the following manufacturing directions:

 

  • Residential and hospitality guest-room lighting: 3500 K sits cooler than 3000 K but softer than 4000 K, and CRI 90 renders interior materials naturally-suited to living and lodging spaces that need a comfortable "neither yellow nor stark white" feel.
  • Commercial and retail accent lighting: In shops, showrooms, and dining spaces, CRI 90 helps fabrics, food, and decorative materials read accurately; the 2835 package and 120° output support even washes in panel and linear fixtures.
  • Panel and linear light modules: The 0.7 mm height and wide beam produce low-graininess luminance behind a diffuser, and the low thermal load at 60 mA suits slim fixture constructions.
  • Maintenance and bin adjustment for existing 2835 CRI 90 platform products: For fixtures already built on DURIS E 2835, if the original XX56 bin is supply-constrained, in-production options in the same family such as 3000 K (XX57) or 4000 K (XX55) may serve as a landing direction within an adjustable CCT range-though target CCT and color-rendering match must be re-confirmed.

Why Choose Gainer LED?

 

 

  • 14 years in LED component distribution: Long-term tracking of lifecycle changes across OSRAM and other brands means familiarity with supply-status differences among bins within mature families like DURIS E 2835. When one bin faces constraints, we help customers locate in-production landing options within the same family rather than guessing amid incomplete information.
  • One-stop sourcing: LEDs, driver ICs, optics, and passives can be consolidated through one channel. In-family bin switches often require confirming driver parameters and optical matching in parallel, and unified purchasing cuts the time spent coordinating separate suppliers.
  • Broad brand portfolio: Multiple mainstream LED brands are covered, supporting cross-brand comparison of CCT, CRI, and package size when an OSRAM bin is supply-constrained-without limiting options to a single source.
  • Broad part coverage with small-batch and sample friendliness: Commonly used part numbers and some constrained-stage items still have stock coverage, supporting the transition from a few validation samples of an alternate bin to maintenance quantities-practical for legacy replenishment and pilot confirmation.
  • Factory-pack shipment with traceable bin information: Delivered in original reel or cut-tape specifications with CCT and CRI bin labels intact, simplifying incoming inspection and line-side bin management-reducing CCT and color-rendering deviation risk in warm-white high-CRI purchasing.
FAQ

Q: The official page shows other bins in full production-why is XX56 (3500K) absent from the list?

A: ams OSRAM's official ordering information lists the 2200 K, 2700 K, 3000 K, 4000 K, 5000 K, 5700 K, and 6500 K options as Full production, but the XX56 option for 3500 K does not appear there. This typically indicates a change in the production status of that specific bin-possibly lower demand concentration or a product-line simplification. Distribution channels are not fully aligned: some show Obsolete, others Last Time Buy or Active. The prudent step is to obtain written factory confirmation through your supplier before ordering rather than relying solely on web labels.

Q: If the 3500K bin is indeed constrained, which direction in the same family can serve as a landing point?

A: In the same family, 3000 K (XX57) and 4000 K (XX55) remain listed as Full production, with consistent package, Vf range, and 60 mA test condition-but the CCT shifts roughly 500 K toward the warm and cool sides respectively. Whether either can take over depends on your application's tolerance for CCT shift. Residential and hospitality projects may find a 500 K shift harder to accept, while commercial accent lighting or tunable-CCT designs have more room. Whichever direction you choose, compare CCT and color rendering in the actual fixture rather than deciding from the datasheet alone.

Q: As a distributor, is this 3500K bin still worth holding?

A: It depends on whether downstream residential, hospitality, or commercial lighting customers still buy this specific bin for maintenance. 3500 K CRI 90 is a relatively niche option among 2835 warm-white products, with less demand concentration than 3000 K or 4000 K-but once a customer's design is calibrated to 3500 K, shifting to another bin requires re-confirming CCT and does not happen casually. Hold only against confirmed project demand rather than speculating, and align inventory turnover with the customer's bin-adjustment timeline.

Q: How much practical difference is there between 3500K CRI 90 and 3000K CRI 80?

A: The difference comes down to two dimensions. In CCT, 3500 K carries less obvious warm-yellow cast than 3000 K and reads closer to "neutral warm white," appearing cleaner in residential and hospitality spaces. In color rendering, CRI 90 reproduces reds and skin tones more fully than CRI 80, and the gap is more perceptible where material color matters. If a project prioritizes "warmth" over "color accuracy," 3000 K CRI 80 may fit better; if the goal is balancing comfort with rendering, the 3500 K CRI 90 positioning is closer. But the final call should come from a physical comparison at target illuminance, not from the CRI number alone.

Q: What is the standard pack, and can I get break quantities for in-family bin comparison?

A: The family ships in Tape & Reel (TR); confirm the exact standard reel quantity with your supplier. In-family bin comparison usually needs only a few dozen pieces for physical CCT and color-rendering side-by-side checks, so ask directly about cut-tape or break-quantity availability. If break quantities carry a minimum order threshold, scope the comparison to two groups-"target bin plus the most likely landing bin"-rather than covering every option at once. The key to bin adjustment is visual confirmation in the actual fixture, and sample quantities only need to be sufficient for that.

 

Hot Tags: OSRAM DURIS® E 2835 GW JTLMS1.CM-G7H2-XX56-1-60-R33 3500K CRI 90 Warm White 2835, China OSRAM DURIS® E 2835 GW JTLMS1.CM-G7H2-XX56-1-60-R33 3500K CRI 90 Warm White 2835 manufacturers, suppliers, factory, LE RTDUW S2WN KBLA 1 MANA P AXAZ P MBNB CQ, LW TVSG CB BXCX JKPL Z486 20 R18 Z, SPLPL90AT03, BPW 34 S, LY T676 R1T1 26 0 20 R18 Z, SFH 2430 Z

You Might Also Like

Shopping Bags