OSRAM Golden DRAGON® LR W5SM-JXJZ-1-1-400-R18-Z-AL 626nm Red 400mA 58lm-Class 7.0×6.0mm SMD

OSRAM Golden DRAGON® LR W5SM-JXJZ-1-1-400-R18-Z-AL 626nm Red 400mA 58lm-Class 7.0×6.0mm SMD

Package & Size: 7.0 mm × 6.0 mm, 1.90 mm height, 2-SMD Gull Wing Exposed Pad, colorless clear silicone, 120° viewing angle;
Color & Wavelength: Red, dominant 626 nm (620–632 nm);
Test Condition: 400 mA / 2.2 V (typ.), flux 58 lm (45–71 lm bin), efficacy approx. 66 lm/W, electrical power approx. 0.88 W;
Drive & Thermal: 1 A max current; −40°C to +125°C operating range; Thinfilm/ThinGaN chip technology.

Description

Product Introduction

 

 

The LR W5SM-JXJZ-1-1-400-R18-Z-AL belongs to ams OSRAM's Golden DRAGON® family-a 626 nm red LED in a 7.0 mm × 6.0 mm SMD package. Within ams OSRAM's high-power color LED portfolio, Golden DRAGON is a platform with historical weight: Thinfilm/ThinGaN chip technology, silicone encapsulation, lifetime design up to 50,000 hours, and a complete color range spanning red, amber, yellow, true green, blue, deep blue, white, and warm white. Its 7.0 mm × 6.0 mm footprint was once a very standard choice in automotive signal lamps, architectural lighting, signage, and entertainment lighting, and the 120° viewing angle with colorless clear silicone forms an even color spot behind a lens or reflector.

 

The electrical profile is clear: 400 mA test point, 2.2 V typical forward voltage, 58 lm flux (45–71 lm bin), approximately 66 lm/W efficacy, and roughly 0.88 W electrical power. The 1 A maximum current leaves headroom for higher pulsed brightness, and the −40°C to +125°C operating range covers typical automotive and outdoor conditions. 626 nm red reads as "true red" visually, clearly distinct from 617 nm amber and 630 nm super red.

Key Product Features

 

 

  • Defined 626 nm red wavelength positioning: The 620–632 nm bin range covers the "true red" visual zone, clearly distinguished from 617 nm amber and 630 nm super red. For automotive tail lights, signal lamps, and signage requiring precise red semantics, 626 nm sits at a balance between "red enough" and "not overly orange."
  • 400 mA test point with 1 A drive headroom: 58 lm is calibrated at 400 mA, and the 1 A maximum leaves 2.5 times the headroom for higher pulsed brightness or compact high-output designs. For brake lights, turn signals, and warning signals that need short-duration high brightness, this headroom provides design flexibility without changing packages.
  • 7.0 mm × 6.0 mm large footprint with 120° Lambertian output: Golden DRAGON's 7.0 × 6.0 mm package has established optical platforms and pad designs in automotive signal modules and architectural lighting fixtures, and the 120° viewing angle with a lens or reflector forms an even color surface. For legacy fixtures already built around this footprint, package-size consistency of the landing bin is the first condition determining whether tooling or fixture changes are needed.
  • Thinfilm/ThinGaN with silicone encapsulation for long-lifetime orientation: Official materials emphasize Golden DRAGON's 50,000-hour lifetime design and low thermal resistance; silicone encapsulation has its engineering logic around thermal cycling and optical consistency. The −40°C to +125°C operating range covers typical automotive and outdoor conditions-suited to signal and signage applications with long-term reliability requirements.

 

Item Value
Manufacturer ams OSRAM
Series Golden DRAGON®
Package 2-SMD,7.0 × 6.0 mm
Color Red
Dominant Wavelength 626 nm(620–632 nm)
Flux @ 400 mA, 25°C 58 lm
Vf (Typ.) 2.2 V
Max Current 1 A
Viewing Angle 120°
Top & Technology −40°C 至 +125°C;Thinfilm/ThinGaN

Application Scenarios

 

 

Golden DRAGON's official application directions cover automotive signal lamps, architectural and indoor lighting, signage, entertainment lighting, and portable lighting. Combined with 626 nm red, 400 mA drive, and the 7.0 × 6.0 mm package, the practical landing spots for this device in legacy projects are scenarios that need "large footprint, high reliability, and clear red semantics":

 

  • Automotive tail lights and exterior signal lamps: Golden DRAGON has a long application history in automotive signaling, and 626 nm red carries clear visual semantics in brake lights, tail lights, and turn signals. The 7.0 × 6.0 mm package and 120° output pair with established optical designs in automotive signal modules, and the 1 A drive headroom provides flexibility across signal modes (steady vs. pulsed). For modules already built around the JXJZ bin, landing requires confirming whether the HZJZ (628 nm, 55 lm) wavelength and brightness differences affect the signal lamp's chromaticity specification and brightness requirements.
  • Architectural and decorative lighting: 626 nm red provides a defined red base in architectural outlines, facade washing, and decorative ambiance, and Thinfilm/ThinGaN with silicone encapsulation suits long-term operation in outdoor and semi-outdoor environments. The 7.0 × 6.0 mm large footprint makes optical design easier in decorative fixtures needing high per-emitter output-rather than dense packing of small devices for brightness.
  • Signage and symbol illumination: The official application list includes signage lighting; 626 nm red offers high legibility in warning signs, exit indicators, and symbol backlighting. The 120° Lambertian output with diffusion structures forms an even red surface behind signage panels, and the 1 A drive headroom leaves adjustment room for different signage-size brightness needs.

Why Choose Gainer LED?

 

 

  • 14 years in LED distribution with hands-on understanding of "old platform, mixed bins" families like Golden DRAGON: The issue is not the status of one part number-it is that multiple bins under the same package platform (JXJZ, HZJZ, HYJY, etc.) differ in wavelength, flux, and lifecycle status. Gainer's long-term tracking of OSRAM product status helps customers break "JXJZ is discontinued, can HZJZ still be used" into verifiable steps: confirm the target bin's official status and channel residual first, compare wavelength and flux differences next, and finish with physical validation against the original fixture's chromaticity specification and brightness target-rather than choosing among bins by feel.
  • Wavelength bin management experience for the chromaticity-consistency sensitivity of red signaling: The difference between 626 nm and 628 nm may not be visually large, but in automotive signal lamp and traffic signage chromaticity specifications, a few nanometers of shift can affect compliance. Gainer has long-standing experience in color LED bin management and bin-by-bin feeding, helping customers refine "I need red" into "which wavelength window do I need"-reducing signal lamp chromaticity deviation and rework from bin misjudgment.
  • Small-batch sample support for a "validate wavelength and brightness differences before committing to volume" legacy landing rhythm: When moving from JXJZ to HZJZ or HYJY, the validation focus is not whether flux numbers are close, but whether chromaticity and brightness distribution still match the target in the real optical structure. Gainer supports small-batch R&D sample purchases, letting customers take a few dozen candidate-bin samples through visual and chromaticity confirmation behind the lens or reflector before deciding the volume direction-without carrying full-reel inventory just to validate.
  • Matching advice across LED, optics, and driver to reduce cross-category trial and error during landing: Golden DRAGON's 7.0 × 6.0 mm package is typically paired with specific lenses or reflectors in automotive signal lamps and architectural fixtures. When switching bins, even with a consistent package, wavelength changes may affect lens coating or diffuser material matching. Gainer has practical project experience in LED-to-optics matching and can provide direction during landing, cutting the time spent shuttling samples between emitter and optics suppliers.
  • Factory packaging with intact lot labels for traceability during the parallel phase of legacy replenishment and landing validation: While JXJZ residual is being consumed and landing bins are being validated, two different wavelengths may coexist on the production line. Gainer ships in original reels or cut tape with lot and bin labels preserved, supporting wavelength- and bin-isolated feeding-reducing finished-goods chromaticity deviation from mixed materials and providing a complete material chain for customer audits.
FAQ

Q: JXJZ is discontinued-can the same-family HZJZ (628nm) and HYJY (625nm) be used as direct replacements?

A: Do not assume "same family, same package means direct swap." All three share the same package (7.0 × 6.0 mm, 2-SMD), but wavelength and flux differ: JXJZ is 626 nm / 58 lm, HZJZ is 628 nm / 55 lm, and HYJY is 625 nm / 47 lm. For automotive signal lamps and traffic signage, a 626 nm to 628 nm shift may affect chromaticity compliance, and a drop from 58 lm to 55 lm or 47 lm may affect target brightness. The prudent route is to first confirm your application's tolerance for wavelength and flux, then take candidate-bin samples through chromaticity and brightness comparison in the original fixture's optical structure-rather than skipping validation on "all Golden DRAGON" alone.

Q: The 400mA test current-what circuit changes are needed compared with common 350mA or 700mA drive schemes?

A: The key is whether the driver can operate stably around 400 mA. If the existing scheme is a 350 mA constant-current driver, confirm whether the current setting can be adjusted to 400 mA and whether the output voltage range covers the Vf near 2.2 V; if it is a 700 mA scheme, assess whether brightness still meets the target after reducing to 400 mA, or whether PWM dimming can compensate. For resistor-based schemes, recalculate resistance and power dissipation against 2.2 V Vf and 400 mA-do not carry over resistor values from 350 mA or 700 mA designs. Before substituting, measure the actual current the existing circuit delivers to the target LED rather than comparing datasheet numbers alone.

Q: As a distributor, with JXJZ discontinued but HZJZ and other bins still circulating, how should inventory strategy be set?

A: It depends on how sensitive downstream customers are to 626 nm versus 628 nm. If customers are automotive signal lamp or traffic signage manufacturers, chromaticity tolerance may be narrow and 626 nm and 628 nm may not be interchangeable-JXJZ residual stock has real value for their maintenance purchases, but holdings should correspond strictly to confirmed orders or short-term maintenance needs, not speculation. If customers' applications are insensitive to a few-nanometer shift, HZJZ can serve as the landing direction, and inventory strategy should shift to stocking against HZJZ's supply rhythm rather than continuing to hunt for JXJZ. The key is managing "JXJZ residual" and "HZJZ landing" separately-not pooling different wavelengths in one inventory bucket.

Q:

A: How does Golden DRAGON's 7.0×6.0mm package compare with today's common 3535/5050 packages in fixture design?English: 7.0 × 6.0 mm is a step larger than both 3535 (3.5 × 3.5 mm) and 5050 (5.0 × 5.0 mm), and the 1.90 mm height is also taller. This means fewer emitters fit into the same fixture size with higher per-emitter output-suited to signal lamps and architectural structures that need "fewer pieces, higher power." But for fixtures chasing high-density layouts or ultra-thin designs, this footprint can feel oversized. If an existing fixture already has optics and thermal structures designed around the 7.0 × 6.0 mm platform, keeping package size consistent during landing is the least disruptive path; if considering a 3535/5050 alternative, optics, pads, and thermal design must be re-evaluated-not just flux numbers.

Q: What are the standard packaging and break-quantity policies? Can I get small samples for wavelength and brightness landing comparison?

A: The family is typically supplied in Tape & Reel, and the exact standard pack quantity should be confirmed with your supplier. For legacy landing validation, a few dozen candidate-bin samples usually suffice-ask directly about Cut Tape or break-quantity availability. The focus is not the single-emitter flux figure but whether HZJZ or HYJY's red hue and brightness distribution match JXJZ behind the original fixture's lens or reflector, and whether junction temperature remains within the original thermal design at the target drive current. If break quantities carry a minimum order threshold, scope the comparison to two groups-"JXJZ residual plus the most likely landing bin"-rather than covering every same-family bin at once.

 

Hot Tags: OSRAM Golden DRAGON® LR W5SM-JXJZ-1-1-400-R18-Z-AL 626nm Red 400mA 58lm-Class 7.0×6.0mm SMD, China OSRAM Golden DRAGON® LR W5SM-JXJZ-1-1-400-R18-Z-AL 626nm Red 400mA 58lm-Class 7.0×6.0mm SMD manufacturers, suppliers, factory, SFH 309 FA 4, GW CSSRM3 PM, LR T64F CBDB 1 1 20 R33 Z, PLPVYL1 940A E, GW JTLMS3 CM G8GW XX51 1 60 R33, SFH 4718A

You Might Also Like

Shopping Bags